<< Installing Firebird | Firebird 2 Quick Start Guide | Working with databases >>

Server configuration and management

There are several things you should be aware of – and take care of – before you start using your freshly installed Firebird server. This part of the manual introduces you to some useful tools and shows you how to protect your server and databases.

User management: gsec

Firebird comes with a command-line user management tool called gsec. Although its functions can also be performed by a number of third-party GUI utilities, you should at least have a basic knowledge of gsec, since this is the official tool and it's present in every Firebird server installation. In the next sections you will use gsec to execute two tasks: changing the SYSDBA password and adding a Firebird user. First though, some points of attention:

Permission to run gsec

With some Firebird installations, you can only run gsec if you are logged into the operating system as Superuser (root on Linux) or as the user the Firebird server process runs under. On Windows server platforms, you typically need to be in the Power User group or higher to run gsec successfully.

Trouble running gsec

If you have enough privileges but invoking gsec results in a message like cannot attach to password database - unable to open database:

• You may be running Firebird on Windows and for some reason the local protocol isn't working. One rather common cause for this is running Windows with Terminal Services (Remote Desktop Services) enabled and connecting to the server from a different session. To enable the local protocol, open firebird.conf, uncomment the IpcName parameter and set it to Global\FIREBIRD. Then restart the server.

• If the above doesn't apply to you, you can at least circumvent the problem by “tricking” gsec into using TCP/IP. Add the following parameter to the command line, adjusting the path if necessary:
  -database "localhost:C:\Program Files\Firebird\Firebird_2_0\security2.fdb"

• Maybe your security database is a renamed security.fdb from Firebird 1.5. Of course this can't be the case immediately after installation. Someone (you?) must have put it there, in order to keep the existing accounts available. Consult the Release Notes for instructions on how to upgrade old security databases.

If the error message starts with Cannot attach to services manager, the server may not be running at all. In that case, go back to Testing your installation and fix the problem.

Calling gsec on Linux

On **nix systems, if you call gsec from its own directory, you should type ./gsec instead of just gsec. The current directory is usually not part of the search path, so plain gsec may either fail or launch a "wrong" gsec.

Changing the SYSDBA password

One Firebird account is created automatically as part of the installation process: SYSDBA. This account has all the privileges on the server and cannot be deleted. Depending on version, OS, and architecture, the installation program will either

• install the SYSDBA user with the password masterkey (actually, masterke: characters after the eighth are ignored), or
• ask you to enter a password during installation, or
• generate a random password and store that in the file SYSDBA.password within your Firebird installation directory.

If the password is masterkey and your server is exposed to the Internet at all – or even to a local network, unless you trust every user with the SYSDBA password – you should change it immediately using the gsec command-line utility. Go to a command shell, cd to the Firebird bin subdirectory and issue the following command to change the password to (as an example) icuryy4me:

 gsec -user sysdba -pass masterkey -mo sysdba -pw icuryy4me

Notice that you specify sysdba twice in the command:

• With the -user parameter you identify yourself as SYSDBA. You also provide SYSDBA's current password in the -pass parameter.
• The -mo[dify] parameter tells gsec that you want to modify an account – which happens to be SYSDBA again. Lastly, -pw specifies the type of modification: the password.

If all has gone well, the new password icuryy4me is now encrypted and stored, and masterkey is no longer valid. Please be aware that unlike Firebird user names, passwords are case-sensitive.

Adding Firebird user accounts

Firebird allows the creation of many different user accounts. Each of them can own databases and also have various types of access to databases and database objects it doesn't own.

Using gsec, you can add a user account as follows from the command line in the Firebird bin subdirectory:

 gsec -user sysdba -pass masterkey -add billyboy -pw sekrit66 

Provided that you've supplied the correct password for SYSDBA, a user account called billyboy will now have been created with password sekrit66. Remember that passwords are case-sensitive.

Note: Since Firebird 2, users can change their own passwords. Previous versions required SYSDBA to do this.

back to top of page

Security

Firebird 2 offers a number of security options, designed to make unauthorised access as difficult as possible. Be warned however that some configurable security features default to the old, “insecure” behaviour inherited from InterBase and Firebird 1.0, in order not to break existing applications.

It pays to familiarise yourself with Firebird's security-related configuration parameters. You can significantly enhance your system's security if you raise the protection level wherever possible. This is not only a matter of setting parameters, by the way: other measures involve tuning file system access permissions, an intelligent user accounts policy, etc.

Below are some guidelines for protecting your Firebird server and databases.

Run Firebird as non-system user

On Unix-like systems, Firebird already runs as user firebird by default, not as root. On Windows server platforms, you can also run the Firebird service under a designated user account (e.g. Firebird). The default practice – running the service as the LocalSystem user – poses a security risk if your system is connected to the Internet. Consult README.instsvc in the doc subdir to learn more about this.

Change SYSDBA's password

As discussed before, if your Firebird server is reachable from the network and the system password is masterkey, change it.

Don't create user databases as SYSDBA

SYSDBA is a very powerful account, with full (destructive) access rights to all your Firebird databases. Its password should be known to a few trusted database administrators only. Therefore, you shouldn't use this super-account to create and populate regular databases. Instead, generate normal user accounts, and provide their account names and passwords to your users as needed. You can do this with gsec as shown above, or with any third-party Firebird administration tool.

Protect databases on the file system level

Anybody who has file system-level read access to a database file can copy it, install it on a system under his or her own control, and extract all data from it – including possibly sensitive information. Anybody who has file system-level write access to a database file can corrupt it or totally destroy it.

As a rule, only the Firebird server process should have access to the database files. Users don't need, and should not have, access to the files – not even read-only. They query databases via the server, and the server makes sure that users only get the allowed type of access (if at all) to any objects within the database.

Disable Classic local mode on Linux

An exception to the above rule is the so-called local or embedded access mode of Firebird Classic Server on Linux. This mode requires that users have proper access rights to the database file itself. They must also have read access to the security database security2.fdb. If this worries you, reserve file system access to the security database (and other databases, while you're at it) for the server process only. Users are then obliged to connect via the network layer. However, the libfbembed.* libraries should not be removed from your system, because the Firebird command-line tools refuse to run if they are not present.

(Another exception is the Windows Embedded Server, but that's outside the scope of this manual.)

Use database aliases

Database aliases shield the client from physical database locations. Using aliases, a client can e.g. connect to “frodo:zappa” without having to know that the real location is frodo:/var/firebird/music/underground/mothers_of_invention.fdb. Aliases also allow you to relocate databases while the clients keep using their existing connection strings.

Aliases are listed in the file aliases.conf, in this format on Windows machines:

 poker = E:\Games\Data\PokerBase.fdb
 blackjack.fdb = C:\Firebird\Databases\cardgames\blkjk_2.fdb

And on Linux:

 books = /home/bookworm/database/books.fdb
 zappa = /var/firebird/music/underground/mothers_of_invention.fdb

Giving the alias an .fdb (or any other) extension is fully optional. Of course if you do include it, you must also specify it when you use the alias to connect to the database.

Restrict database access

The DatabaseAccess parameter in firebird.conf can be set to Restrict to limit access to explicitly listed file system trees, or even to None to allow access to aliased databases only. Default is All, i.e. no restrictions.

Note that this is not the same thing as the file system-level access protection discussed earlier: when DatabaseAccess is anything other than All, the server will refuse to open any databases outside the defined scope even if it has sufficient rights on the database files.

Choose your authentication model (2.1 only)

Firebird 2.1 and higher support three authentication models when connecting to databases or using the tools:

1. Native: The user must identify him/herself with a Firebird username and password, which the server checks against the security database. 2. Trusted: The user is automatically identified by his OS account name. 3. Mixed: The user either supplies a Firebird username and password, or is logged in with his OS account name.

On Linux, the mixed model is used.

On Windows, the default is mixed in 2.1, 2.1.1 and 2.1.2, and native in 2.1.3 and higher. You can change the model by setting the Authentication parameter in firebird.conf. Depending on your Windows system configuration and the way Firebird is used, trusted may be the most secure option. If trusted authentication is used when the connection is made (this is possible in the trusted and mixed models), Windows administrators automatically receive SYSDBA privileges.

Firebird 2.0 doesn't have the Authentication parameter. Authentication under Windows is native.

There are more security parameters, but the ones not mentioned here are already set to an adequate protection level by default. You can read about them in the 1.5 and 2.0 Release Notes and in the comments in firebird.conf itself.

back to top of page

Windows Control Panel applets

Several control panel applets are available for use with Firebird. Whilst such applets are not essential, they do provide a convenient way to start and stop the server and check its current status.

Firebird Server Manager

The Firebird Server Manager applet is included in the Firebird distribution. The option to install this applet is only available for Superserver.

Note: The applet is also usable for Classic server, provided that it (the server, that is) runs as a service, not as an application. Since the installation dialogue won't give you the option to include the applet with a Classic server, you must, if you really want it:

• Install Superserver first;
• Copy the applet Firebird2Control.cpl from the Windows system folder to a safe place;
• Uninstall Superserver;
• Install Classic;
• Copy the applet back to the system directory.

This is a screenshot of the activated applet. Notice that the title bar says “Firebird Server Control”, although it is listed in the Control Panel as Firebird 2.0 Server Manager.

Unfortunately, the bundled applet only works on Windows NT, 2000/2003 and XP.

Firebird Control Center

If you want an applet that also works on Windows 9x or ME, visit this webpage:

https://www.achim-kalwa.de/fbcc.phtml

...and download the Firebird Control Center fbcc-0.2.7.exe. Please note that, unlike the applet included with Firebird, the Firebird Control Center will not work with Classic servers at all.

The Control Center doesn't look anything like the Firebird applet shown in the screenshot, but offers the same functionality, and then some. Attention: if you run Firebird as a service and without the Guardian, the Start/Stop button will be labeled Start all the time, even when the server is already running. It functions as it should though. In all other configurations the button will say Start or Stop according to the situation.

back to top of page

Administration tools

The Firebird kit does not come with a GUI admin tool. It does have a set of command-line tools – executable programs which are located in the bin subdirectory of your Firebird installation. One of them, gsec, has already been introduced to you.

The range of excellent GUI tools available for use with a Windows client machine is too numerous to describe here. A few GUI tools written in Borland Kylix, for use on Linux client machines, are also in various stages of completion.

Inspect the Downloads > Contributed > Administration Tools page at https://www.ibphoenix.com for all of the options.

Remember: you can use a Windows client to access a Linux server and vice-versa.

See also:
Configuring Firebird

back to top of page
<< Installing Firebird | Firebird 2 Quick Start Guide | Working with databases >>